Harry Menser is a great guy. I love listening to old guys talk and allowing me to learn from their experiences. Thank you very much for the opportunity Sir.
Mon – Thu: 7:00AM – 6:00PM
909 U.S. 2 W, Sandpoint, ID 83864
Call Us: (208) 255-2955
Other Media Videos
Harry Menser is a great guy. I love listening to old guys talk and allowing me to learn from their experiences. Thank you very much for the opportunity Sir.
Uscope - https://www.aeswave.com/uScope-Master-Kit-p9622.html 5V reference circuits cause some of the most confusing “multiple sensor failure” diagnostics in modern vehicles. In this video I break down what 5V reference is, why it’s 5 volts, how the ECM/PCM uses it to...
www.aeswave.com Uscope - https://www.aeswave.com/uScope-Master-Kit-p9622.html Wyze Probe - https://www.aeswave.com/15-inch-WyzeProbe-for-Secondary-Ignition-and-COP-p8764.html Rotkee Probe - https://store.rotkee.com/en/lx1-coil-on-plug-probe.html In this video I...
Probes - https://www.aeswave.com/uMicroBackProbe-Minimum-impact-probe-for-high-density-connectors-p10709.html U scope - https://www.aeswave.com/uScope-Master-Kit-p9622.html Check out our website - sixstarautomotive.com If you’ve ever scoped an ignition coil, injector,...
In this video, I break down how to perform a Relative Compression Test using an oscilloscope. This fast, non-invasive diagnostic method lets you check engine health without removing spark plugs. You’ll learn how to set up the test, connect a current clamp, record the...
Secondary ignition diagnostics are often overlooked in modern vehicles due to coil-on-plug systems—but the waveform still tells a powerful story. In this video, secondary ignition waveforms are captured and analyzed using an oscilloscope to reveal what is actually...
Today we’re rebuilding the rear brake calipers on a DeLorean — a job that solves common issues such as dragging brakes, uneven pad wear, sticking pistons, and handbrake imbalance. The DeLorean’s rear calipers have some unique design quirks, including the integrated...
Learn practical lab-scope workflows you can use today. We reinforce the basics with real-world tests: checking primary ignition current with a low-amp probe, verifying an entire bank of coils via the common power feed, reading fuel-pump current through a fuse-loop...
In this video, I go in-depth on how the LOADpro Dynamic Test Leads work and how I pair them with the Power Probe for faster circuit testing. I build a simple circuit to demonstrate real-worldish conditions and show why a circuit can appear to have full voltage—but still fail under load.
You’ll see how just connecting wires with my thumb makes the meter read high voltage on the other side of the circuit, even though it can’t carry any real current. This is exactly why a tool like LOADpro is critical: it helps you spot hidden problems that traditional voltage checks miss.
Whether you’re a professional technician or are just curious, this walkthrough will help you understand:
How to properly use LOADpro with a Power Probe
Why voltage readings can be misleading without load testing
How to quickly diagnose high-resistance connections and weak circuits
Real demonstrations of a circuit failing under load
This is a must-know diagnostic method for anyone chasing intermittent electrical problems.
🔧 If you found this video helpful, please like, subscribe, and share!